[OCCAID] [Fwd: Fwd: Completed ACD form]

Sun Jan 30 22:04:59 EST 2005

Hello, I requested an ipv6 tunnel awhile ago and would now like to
start peering, and I need an AS number.

I originally attempted to send this in under my originally registered email address (whitney.green at gmail.com)
but for some reason it wasn't able to send.

 I guess just change :

 (2a) on my application form to a No.
 (3a). to a YES
 and
 (3c) to 3ffe:401d:203f::/48

 Thanks!
 Whitney Green

---------- Forwarded message ----------
From: whitney green <whitney.green at gmail.com>
Date: Sun, 7 Nov 2004 15:50:47 -0500
Subject: Completed ACD form
To: occaid at cnacs.occaid.org

# ACD Version 1.5 (Last updated: Oct 30 2004)
#
# Open Contributors Corporation
# for Advanced Internet Development
# ----------------------------------
# Architecture Confirmation Document
# ----------------------------------
# This document is used to help the OCCAID deployment
# team better understand how we can connect your site
# to the community.
#
#
# Please specify the type of connections you want to establish to OCCAID
# network. Specify IPv6 if you want IPv6 connection only. Specify IPv4 if you
# want IPv4 connection only. Specify BOTH if you want to connect using both
# protocols. Note that IPv6 portion of our network gives you full IPv6 internet
# transit access, while IPv4 is only to our virtual lab world.
1a. Type of connection (IPv4|IPv6|BOTH):
IPv6

#
#
# Please describe the type of router you are using
# to connect to OCCAID. The router can be Cisco, Juniper,
# FreeBSD or Linux.
1b. Type of router:
Linux

#
# If you have a registered AS number, say Yes. Else, No.
2a. Do you have AS:
# SKIP TO 3a IF YOU ANSWERED 2a "NO"
2b. What is your AS number:
#
#
# Do you want to engage into Border Gateway Protocol (BGP) routing with OCCAID?
# If you do not have an AS number, as you may have said "No" in the above
# question, we will assign you a private AS number that is unique within our
# community.
3a. Want BGP (YES|NO)?
NO

#
#
# Please list all of your current existing IPv4 address blocks issued to your
# network or organization which you intend to route to the OCCAID community over
# the BGP session. If you do not have one, we may assign you a /29 prefix from
# our block(s). If you are only signing up for IPv6, then this question should
# be left blank as it is not pertinent to you.
3b. List IPv4blocks to route:
#
#
# Please list all of your current existing IPv6 address blocks issued to your
# network or organization which you intend to route to the OCCAID community over
# the BGP session. If you are looking for IPv6 transit connection and have your
# own TLA allocation from a RIR (such as ARIN, RIPE NCC, etc), and if you also
# have a public AS number, we will then give transit to your TLA space.
# Otherwise, we will only keep your IPv6 prefixes routed inside within our
# network, but not redistributed to rest of the IPv6 internet. If you are only
# signing up for IPv4, then this question should be left blank as it is not
# pertinent to you.
#
# If you do not have any IPv6 blocks and want to obtain a /48 from OCCAID,
# then leave this question blank and move to next.
#
3c. List IPv6blocks to route:
#
#
# Do you also want OCCAID to allocate you a /48 IPv6 block to use, out of our
# IPv6 block(s)? Say Yes or No. If you are only signing up for IPv4, this
# question is again not pertinent to you and should be thus ignored.
#
3d. Want IPv6 NLA Block? (YES|NO)
YES
:
#
#
# If you have existing POC record with your applicable RIR
# (i.e. ARIN, APNIC, RIPE, LACNIC), please put it below:
4a. OrgTechHandle:
# If you have existing OrgID record with your applicable RIR
# (i.e. ARIN, APNIC, RIPE, LACNIC), please put it below:
4b. OrgID:
#
# What is the existing IP address of your router that you'll
# be connecting to OCCAID? We need this IP address to establish
# the tunnel connection to you. Note that this IP address must
# be static IP. (DHCP or PPPoX is fine as long as your IP stays
# unchanged for long amount of time)
5. RouterIP:
208.42.228.219

#
#
#
7. Comments:
Thank you!

#
# You are all set! Send completed ACD form to occaid at cnacs.occaid.org
# to get started. You must be subscribed to the OCCAID list first-hand
# before sending this.
#
# To subscribe to OCCAID list:
# http://mailman.twdx.net/mailman/listinfo/occaid
#
# Please understand that people who operate OCCAID are doing this out of their
# own free time for hobby and community commitment. While they fully realize and
# understand that they have the duty to serve the community, when they are busy
# and tired, requests may be delayed for up to as long as one full week. We
# will try our best to attend to your connection request as fast as we can, but
# please give up to 5 business days before reposting your request.
#
# Just to give you a general idea of provisioning time, it takes less time for
# OCCAID operators to setup IPv6 connections than IPv4. So you may see your
# IPv6 stuff coming up faster than your IPv4 request.

-------------- next part --------------
# ACD Version 1.5 (Last updated: Oct 30 2004)
#
# Open Contributors Corporation
# for Advanced Internet Development
# ----------------------------------
# Architecture Confirmation Document
# ----------------------------------
# This document is used to help the OCCAID deployment
# team better understand how we can connect your site
# to the community.
#
#
# Please specify the type of connections you want to establish to OCCAID
# network. Specify IPv6 if you want IPv6 connection only. Specify IPv4 if you
# want IPv4 connection only. Specify BOTH if you want to connect using both
# protocols. Note that IPv6 portion of our network gives you full IPv6 internet
# transit access, while IPv4 is only to our virtual lab world.
1a. Type of connection (IPv4|IPv6|BOTH):
IPv6

#
#
# Please describe the type of router you are using
# to connect to OCCAID. The router can be Cisco, Juniper,
# FreeBSD or Linux.
1b. Type of router:
Linux

# 
# If you have a registered AS number, say Yes. Else, No.
2a. Do you have AS:
# SKIP TO 3a IF YOU ANSWERED 2a "NO"
2b. What is your AS number:
#
#
# Do you want to engage into Border Gateway Protocol (BGP) routing with OCCAID?
# If you do not have an AS number, as you may have said "No" in the above
# question, we will assign you a private AS number that is unique within our
# community.
3a. Want BGP (YES|NO)?
NO

#
#
# Please list all of your current existing IPv4 address blocks issued to your
# network or organization which you intend to route to the OCCAID community over
# the BGP session. If you do not have one, we may assign you a /29 prefix from
# our block(s). If you are only signing up for IPv6, then this question should
# be left blank as it is not pertinent to you.
3b. List IPv4blocks to route:
#
#
# Please list all of your current existing IPv6 address blocks issued to your
# network or organization which you intend to route to the OCCAID community over
# the BGP session. If you are looking for IPv6 transit connection and have your
# own TLA allocation from a RIR (such as ARIN, RIPE NCC, etc), and if you also
# have a public AS number, we will then give transit to your TLA space. 
# Otherwise, we will only keep your IPv6 prefixes routed inside within our
# network, but not redistributed to rest of the IPv6 internet. If you are only
# signing up for IPv4, then this question should be left blank as it is not
# pertinent to you.
#
# If you do not have any IPv6 blocks and want to obtain a /48 from OCCAID,
# then leave this question blank and move to next.
# 
3c. List IPv6blocks to route:
#
#
# Do you also want OCCAID to allocate you a /48 IPv6 block to use, out of our
# IPv6 block(s)? Say Yes or No. If you are only signing up for IPv4, this
# question is again not pertinent to you and should be thus ignored.
#
3d. Want IPv6 NLA Block? (YES|NO)
YES
:
#
#
# If you have existing POC record with your applicable RIR
# (i.e. ARIN, APNIC, RIPE, LACNIC), please put it below:
4a. OrgTechHandle:
# If you have existing OrgID record with your applicable RIR
# (i.e. ARIN, APNIC, RIPE, LACNIC), please put it below:
4b. OrgID:
#
# What is the existing IP address of your router that you'll
# be connecting to OCCAID? We need this IP address to establish
# the tunnel connection to you. Note that this IP address must
# be static IP. (DHCP or PPPoX is fine as long as your IP stays
# unchanged for long amount of time)
5. RouterIP:
208.42.228.219

#
#
#
7. Comments:
Thank you!

#
# You are all set! Send completed ACD form to occaid at cnacs.occaid.org
# to get started. You must be subscribed to the OCCAID list first-hand
# before sending this.
#
# To subscribe to OCCAID list:
# http://mailman.twdx.net/mailman/listinfo/occaid
#
# Please understand that people who operate OCCAID are doing this out of their
# own free time for hobby and community commitment. While they fully realize and
# understand that they have the duty to serve the community, when they are busy
# and tired, requests may be delayed for up to as long as one full week. We
# will try our best to attend to your connection request as fast as we can, but
# please give up to 5 business days before reposting your request.
#
# Just to give you a general idea of provisioning time, it takes less time for
# OCCAID operators to setup IPv6 connections than IPv4. So you may see your
# IPv6 stuff coming up faster than your IPv4 request.